|
|
|
Preliminary Programme
Session Timing
May 22
08.00-17.00 Registration
09.00-09.15 Welcome
09.15-10.00 Keynote Speaker
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-14.00 Lunch
14.00-15.00 Sessions
15.00-15.30 Coffee Break
15.30-17.30 Sessions
17.30 Free Evening
May 23
08.30-17.00 Registration
09.00-10.00 Invited Speaker
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-14.00 Lunch
14.00-15.00 Sessions
15.00-15.30 Coffee Break
15.30-17.30 Sessions
20.00-23.00 Conference Dinner
May 24
08.30-09.00 Registration
09.00-10.00 Invited Speaker
10.00-10.30 Coffee Break
10.30-12.30 Sessions
12.30-12.45 Closing Session and Best Paper Award
Keynote Speeches
Simulation in the boardroom : industrial footprint optimization
Prof. Hendrik Vanmaele, Mobius Consulting, Ghent, Belgium
Knowledge Simulation and Return on Education in the Logistics Industry
Prof. Dr. Matthias Klumpp, FOM University of Applied Sciences, Essen, Germany
Simulation of the Redundant Electrohydraulic Control Systems
Professor Nicolae Vasiliu, "POLITEHNICA" University of Bucharest, Bucharest, Romania
SESSIONS
AI SIMULATION
METH_NEUR_01
FPGA Based Neuro-Fuzzy System with Fuzzy System: Comparative Study
Rasha E. Karakchi, University of Mosul, Iraq
ENGIN_04
Supervising cathodic protected nets with CI-based methods
Matthias Reuter, TU-Clausthal/ CUTEC Institute GmbH, Clausthal-Zellerfeld, Germany
BUSINESS MANAGEMENT SIMULATION
COMPLEX_01
Three Eight Dimensional Correlation Studies
William Conley, Austin E. Cofrin School of Business, University of Wisconsin-Green Bay, Green Bay, U.S.A.
AI_02
Simulation Gaming and Natural Language Processing for Modelling Stakeholder Behavior in Energy Investments
A. Ittoo, N.B. Szirbik G.B. Huitema and J.C. Wortmann, University of Groningen, The Netherlands
LOGIS_01
Simulation Benchmarks in Incentive Contracts for Delegates Procurement
Tarik Aouam, College of Engineering, American University of Sharjah, Sharjah
METH_03_TEL
Hybrid Simulation of Mobile Business Processes
Stefan Hellfeld, FZI Research Center for Information Technology, Karlsruhe, Germany
HEALTH CARE MANAGEMENT SIMULATION
LOGIS_HEALTH_01
Simulation of non-clinical work environments in a General Hospital using building information modeling
Norman Wu and Zhijian Kang, Technology and Engineering Center, MOH Holdings, Singapore
HEALTH_03
How two Management Engineers and a Simulation Software can support the Organization of a New Surgical Pre-Admission Unit
G. Romanin-Jacur and F. Segala, University of Padova, Padova, Italy
WASTE WATER MANAGEMENT SIMULATION
AI_04
Planning Revitalization Sewerage Systems using Decision Rules of Fuzzy Logic
Agnieszka Służalec, Systems Research Institute and Andrzej Ziółkowski, Warsaw Information Technology, Warsaw, Poland
OPT_03
Using Optimization Approaches for Modeling, Control and Management of Water Networks
Jan Studzinski, Polish Academy of Science, Systems Research Institute, Warsaw, Poland
SIMULATION IN ENGINEERING
MULTI_03
Development and Evaluation of an Order-N Formulation for Multi-Flexible Body Space systems
Tushar Ghosh, L-3 Communications, STRATIS, Houston, United States
ENGIN_01
Topology Optimization of the Clamping Unit in a Two-platen Injection Machine Based on Finite Element Analysis
Zhang Hua-wei, Zhi-heng Wu and Zhengzhenxing, Guangdong General Research Institute for Industrial Technology, Guangzhou, China
TOOLS_01
Industrial Simulation in Fluid Power Systems by SIMULINK and AMESIM
Daniela Vasiliu, Georgiana Claudia Vasiliu and Nicolae Vasiliu, University POLITEHNICA of Bucharest, Bucharest and Petru-Cristinel Irimia, LMS Test Division –CAE Division, Brasov, Romania
ENGIN_05
Thermal Modeling of a Battery Package used on Road Vehicle Powertrain
Valerian Croitorescu and Nicolae Vasiliu, University POLITEHNICA of Bucharest, Bucharest, Romania and Jan Anthonis, LMS International, Leuven, Belgium
TURBINE SIMULATION
ENGIN_07
Numerical Simulation and Experimental Validation of the Transients from high Head Hydropower Plants
Radu Puhalschi, Marius Mitroi, Constantin Calinoiu and Nicolae Vasiliu, University POLITEHNICA of Bucharest, Bucharest, Romania
ENGIN_10
Lifetime Evaluation of the Mechanical Elements for Hydraulic Turbines by Numerical Simulation
Constantin Dragoi, Vlad Florin Piraianu, University POLITEHNICA of Bucharest, Bucharest and Petru-Cristinel IRIMIA, LMS Test Division - CAE Division, Brasov, Romania
ENERG_01
Modelling Building Effects on Atmospheric Dispersion Comparison between ADMS and ANSYS CFD
Claudia Gheorghe (Nicolici) and Ilie Prisecaru, Politehnica University of Bucharest and Stefan Nicolic and Radu M.Bilegan, Center of Technology and Engineering for Nuclear Projects, Magurele, Romania
ELECTRONIC NETWORKS SIMULATION
ELEC_01
Characteristics of High-k Spacer double-gate (DG) MOSFETs
Zhou Fang and Shenghou Liu, The Hong Kong University of Science and Technology, Hong Kong and Hong Huang, Southeast University, China
TEL_01
Adjusting WIMAX for Dedicated Surveillance Network
Suherman, De Montfort University, Leicester, United Kingdom
TEL_06
Toward a Multi-hop, Multi-path Fault-Tolerant and Load Balancing Hierarchical Routing Protocol for Wireless Sensor Network
Mokhtar Beldjehem, University of Ottawa, Ottawa, Ontario, Canada
METH_05
Improving Performance Prediction of Parallel and Distributed Discrete Event Simulation: A Rough Sets Based Approach
László Muka and István Derka, Széchenyi István University, Győr, Hungary
TEL_04
Testing The Speed up of Parallel Discrete Event Simulation in Heterogeneous execution Environments
Gábor Lencse and István Derka, Széchenyi István University, Győr, Hungary
TEL_02_COMPLEX
Algorithms for Accelerated Rare Event Simulation with Markov Chain Modelling in Communication Networks
Izabella Lokshina, SUNY Oneonta, Oneonta, Evan Schiele, SAP America, Inc, Morristown, USA
LOGIS_04
Time Response of Operating Systems simulated by load balancing in Gridsim
Peter Kvasnica, Igor Kvasnica and Rozmarína Dubovská, Hradec Králové, Slovakia
MANUFACTURING SIMULATION
MANUF_01
Simulation of a winding production unit for the supply automation of bobbins
Brahmadeep and Sébastien Thomassey, GEMTEX - ENSAIT / Roubaix and University of Lille - North of France / Villeneuve d'Ascq, France
MANUF_04
Impact of Industrial Sorting on various Pistachio Categories in link with Aflatoxin Contamination thanks to a Monte Carlo Simulation
Nathalie Wesolek, Alejandra Ramirez-Martinez, Alain-Claude Roudot, LERCCO (Laboratoire d’Evaluation du Risque Chimique pour le COnsommateur) and UBO (Université de Bretagne Occidentale), Brest, France
PRODUCTION OPTIMIZATION
OPT_01
Using Shewhart Control Charts for Continuous Model Optimization
Rodrigo Rezende Amaral, Peter Ottoy and Veronique Limère, Ghent University, Zwijnaarde, Belgium
ENGIN_03
Database-Driven 3D Simulation: a Method Specification using the UML Metamodel
Martin Hoppen, Michael Schluse, Juergen Rossmann, Institute for Man-Machine Interaction, RWTH Aachen University, Aachen, Germany
LOGIS_14
Generic Simulation Model for Assembly Line Supply
Veronique Limere and Kurt Decock, Ghent University, Ghent, Belgium
LOGIS_12
Sectioned Walking Worker Lines with Loop Balancing
Leif Pehrsson, Volvo Car Corporation, Gothenburg, and Amos H.C. Ng and Jacob Bernedixen, The Virtual Systems Research Centre, The University of Skövde, Skövde, Sweden and David Stockton, De Montfort University, Leicester, United Kingdom
METH_07
Simulation System for Linear Cutting Plans
Ovidiu-Dorin Alupei-Cojocariu, Nicolae Vasiliu and Szilard Feher, University POLITECHNICA of Bucharest, Bucharest, Romania
MANUF_02
Automotive Production Location Cost Optimization with Productivity and Sustainability Constraints
Matthias Klumpp and Viktor Kuchshaus, Institute for Logistics and Service Management, FOM University of Applied Sciences, Essen, Germany
AGV SIMULATION
AI_01
Coupling of a Discrete Event Multi-Agent Simulation with a Real Time Multi-Agent Simulation
Christoph Schwarz, OFFIS - Institute for Information Technology, Jurij Schachmanow and Georg Ullmann, IPH - Institut fur Integrierte Produktion Hannover, Jurgen Sauer, Carl von Ossiettzky University Oldenburg, and Ludger Overmeyer, Leibnitz University Hannover, Hannover, Germany
LOGIS_11
Decision-Making in Conceptual AGV Systems Design using Simulation Based Optimization
Leif Pehrsson, Volvo Car Corporation, Gothenburg, and Amos H.C. Ng, Virtual Systems Research Centre, The University of Skövde, Skövde, Sweden
TRAF_03
A Simulation Model using AMR Sensors Applied to Vehicles Classification and Identification
Ramón V. Cirilo Gimeno, Marta Pla Castells, Antonio García Celda and Javier Martínez Plumé, IRTIC, University of Valencia, Paterna, Spain
SUPPLY CHAIN SIMULATION
LOGIS_03
Multivariate Inventory and Selected Problems using Stage Monte Carlo Optimization
William Conley, Austin E. Cofrin School of Business, University of Wisconsin at Green Bay, Green Bay, U.S.A.
LOGIS_07
Estimating the Cost Structure of Wood Chip Supply Chains: A Simulation Approach
Lauri Lättilä, Kalle Karttunen, Olli-Jussi Korpinen, Jarno Föhr and Tapio Ranta, Lappeenranta University of Technology, Kouvola and Lappeenranta, Finland
LOGIS_05
A Scalable Agent Based Decision Support System: Case Manufacturing Supply Chain
Lauri Lättilä and Samuli Kortelainen, Lappeenranta University of Technology, Kouvola and Lappeenranta, Finland
LOGISTICS SIMULATION
LOGIS_09
A Framework for Discrete Event Simulation of Pick Up and Delivery Problems
Anna Syberfeldt, University of Skovde, Skovde, Sweden
LOGIS_10
Simulation Optimization of Waste Collection Based on Ultrasonic Level Measurements
Anna Syberfeldt, University of Skovde, Skovde, Sweden
TRAFFIC SIMULATION
TRAF_05
Analysis of Possible Speedup of the Microscopic Road Traffic Simulation using Aggregate Movement of Vehicles
Tomas Potuzak, University of West Bohemia, Plzen, Czech Republic
TRAF_01
Microscopic Simulation of Multimodal Urban Traffic Network
Ivana Ćavar, Marjana Petrović and Miroslav Vujić, Faculty of transport and traffic sciences, Zagreb, Croatia
